• Categories:News Center
• Author:
• Origin:
• Time of issue:2022-02-28
• Views:0

(Summary description)When the high-pressure cleaner is in use, if it does not absorb water and the pressure gauge does not rotate after being powered on, then it needs to be dealt with according to the following method. First of all, we need to check whether the motor rotates or not. If the motor can rotate, then the description The motor of the high pressure washer is in a normal state. The next step is to check the water inlet filter. If any blockage is found, it needs to be cleaned in time, otherwise it will cause the problem of unusability. After that, it needs to be turned on. Check it. If there is still no pressure display, then the internal overflow valve may be damaged. You can check the bottom. If there is water leakage, the overflow valve must be damaged. If there is no water flow, it may be the one-way valve. If the damage is caused, you need to replace the valve. After the replacement, you can use it normally. If it still cannot work, you need to check the pressure gauge, which may be caused by the damage of the pressure gauge. The above is that the high-pressure cleaner cannot The processing method used can be solved according to the steps, and the source of the fault can be found and processed smoothly, so that the machine can be rotated and used normally.